-
A two component, heat cure epoxy system specifically developed for use on instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling endurance. Product meets UL 94-HB flammability requirements. CLC 15-150 A/B
-
Heat and chemical/fuel resistant adhesive/laminating. A two component heat and chemical resistant epoxy laminating system. CLR 1730 / CLH 6372
-
UL 94-V0 system for potting and casting small electronic parts that require thermal shock and thermal cycling performance. A two component, low viscosity, room temperature cure epoxy system. Material has yellow card UL94-V0 rating, and contains non abrasive fillers suitable for meter mix dispense. CLR 1796 / CLH 6580
-
General Adhesive room temperature cure. Resistant to Toluene, Ethanol, Aviation Gas and Diesel Fuel. A low viscosity, two component, chemical resistant epoxy system. Post cured material has excellent resistance to most petroleum based fuels and solvents during exposure at ambient and elevated temperatures. CLR 3080 / CLH 6372
-
High Temperature. A single component, 100% solids, low viscosity, impregnating compound for coils and transformers. This product is also suitable for sand casting. CLS 9600
-
High temperature clear epoxy. An unfilled, heat resistant, clear laminating system. Products low viscosity gives the system excellent wet-out properties to fibreglass and other reinforcing fibres. The material exhibits high physical strengths and modulus with moderate post cure temperatures. XRD 1014 / XHD 1015